![background image](http://html1.mh-extra.com/html/bticino/391-115/391-115_user-manual_2825235042.webp)
42
Step 7:
Enter the address of the camera in the “Address” data entry field.
The PTZ settings (address, protocol and baudrate) of a motorised camera can vary from model to model.
Refer to the motorised camera’s user manual.
Step 8:
Click on “Save” to confirm.
Step 9:
Click on the “Cancel” button or right-click to return to the main menu.
Step 10:
Right-click to exit the main menu.
Note:
These steps must be carried out camera by camera or can be copied from one camera to another by clicking on the
“Copy” button in the “Copy” line.
Example:
The motorised cameras in our range have the following default settings:
- Protocol: Pelco-D
- Baudrate: 2400
- Address: 001
4.5.3
Control
Step 1:
Click on the button in the taskbar of the channel on which the motorised camera is located to go to the “PTZ”
menu.
Step 2:
The controls of the motorised camera appear.
Step 3:
Set the movement speed by moving the cursor.
Step 4:
Click on the directional arrows to pivot the camera.
Step 5:
Click on “Zoom” + or – to zoom in or out.
Step 6:
Click on “Focus” + or – to adjust the focus.
Step 7:
Click on “Iris” + or – to to adjust the iris.
Note:
- By default, the motorised cameras in our range are configured with automatic Focus and Iris. The corresponding
manual controls are therefore disabled.
PTZ
Movement speed
Camera orientation
controls
Camera settings
Summary of Contents for 391 115
Page 67: ......