![background image](http://html1.mh-extra.com/html/bticino/391-115/391-115_user-manual_2825235035.webp)
U
ser
m
an
ual
4-camera PAL AHD DVR
8-camera PAL AHD DVR
16-camera PAL AHD DVR
35
Step 1-8: Select which camera is to record when movement is detected by checking the corresponding box.
Step 1-9: Define the recording time after movement has been detected in the “Post Recording” dropdown menu.
(Note 1) Configuring a detection area
- Click on “Setup” in the “Area” line. Red blocks representing the activated detection areas appear over the image. By
default, detection is active over the whole of the image.
- Click on the blocks to activate or deactivate detection.
- Right-click to return to the previous screen.
- Click on “Save” to confirm.
- Click on the “Cancel” button or right-click to return to the main menu.
- Right-click to exit the main menu.
Notes:
- When a camera detects a movement, recording can be on that camera, another camera or all the cameras.
- These steps must be carried out camera by camera or can be copied by clicking on the “Copy” button in the “Copy”
line.
Step 2:
Record when movement is detected
Step 2-1: Click on the button in the taskbar to go to the main menu.
Step 2-2:
Click on the “Parameter” button then “Record”, then “Record Schedule”
Detection area activated over the whole image
Detection area deactivated over part of the image
Summary of Contents for 391 115
Page 67: ......