Bticino 343100, Installer Manual

Page: 3 / 38

Monobloc Audio
Digital Entrance Panel
Installer manual
3
Contents
1 Introduction 4
1.1 Warnings and recommendations 4
2 Description 5
2.1 Main functions 5
2.1.1 Using the pushbutton panel 5
2.2 Front view 6
2.3 Back view 7
2.4 Installation 8
3 Configuration 10
3.1 Access to programming 10
3.2 Master code setup 13
3.2.1 Setting up a master code 13
3.2.2 Deleting a master code 13
3.2.3 Deleting all master codes 14
3.2.4 General device reset 14
3.3 SCS and logic addresses setup 15
3.3.1 Call type selection: SCS or logic 15
3.3.2 New logic address from the SCS address 16
3.3.3 Changing a logic address 17
3.3.4 Deleting a logic address 18
3.3.5 Deleting a logic address from an SCS address 19
3.3.6 Deleting all logic addresses 20
3.4 Setup codice serratura 21
3.4.1 Enabling the door lock code function 22
3.4.2 Associating the door lock code to the internal contact or to an external P actuator 23
3.4.3 Setting up a new door lock code
24
3.4.4 Deleting a door lock code 25
3.4.5 Deleting all door lock codes 26
3.5 Passepartout SCS setup 27
3.5.1 Enabling the passepartout function 27
3.5.2 Associating the door lock code to the internal contact or to an external P actuator 28
3.5.3 Setting up a new passepartout
29
3.5.4 Deleting a passepartout code 29
3.5.5 Deleting all passepartout codes 30
3.6 Switchboard setup 31
3.6.1 Enabling the switchboard call 31
3.6.2 Changing the switchboard SCS address 32
3.7 Error messages 33
4 Appendix 34
4.1 Display view 34
4.2 Reset of master codes without using the main master code 35
4.3 Technical data 36