Monobloc Audio
Digital Entrance Panel
Installer manual
17
3.3.3 Changing a logic address
The menu can only be accessed if the type of call selected is a logic address call (P r 1.0);
otherwise the display will show the message E r 0 8.
If the logic address entered does not exist, or is already being used, an error message will be
displayed (see the dedicated section).
Enter the logic address to
change.
Press OK to confirm.
Enter the new logic
address.
Enter another logic
address or finish.
Press OK; a beep confirms
the change
To exit the menu press the
key with the KEY symbol.
