28
If the value entered is different from 0 or 1, an error message will be displayed (see the dedi-
cated section).
3.5.2 Associating the door lock code to the internal contact or to an external
P actuator
Press “0” to associate the
passepartout code to the
N-NC-
NO
contact.
An audible signal confirms the
new setting.
Press “1” to associate the
passepartout code to an actuator
configured with the same
P
address
of the entrance panel.
An audible signal confirms the
new setting.
The setting of this function will also apply to the door lock code function.
3 Configuration