Monobloc Audio
Digital Entrance Panel
Installer manual
19
3.3.5 Deleting a logic address from an SCS address
The menu can only be accessed if the type of call selected is a logic address call (P r 1.0); otherwise
the display will show the message E r 0 8.
It is possible to delete a logic address if the SCS address is known.
Enter the SCS address
associated to the logic
address to delete.
Press
OK
; an audible
signal confirms that
the operation has been
successful.
Delete another logic
address or exit by pressing
the key with the KEY
symbol.
If the code does not exist an error message is displayed (see the dedicated section).