Monobloc Audio
Digital Entrance Panel
Installer manual
23
If the value entered is different from 0 or 1, an error message will be displayed (see the dedi-
cated section).
3.4.2 Associating the door lock code to the internal contact or to an
external P actuator
Press “0” to associate the door lock
code to the
N-NC-NO
contact.
An audible signal confirms the
new setting.
Press “1” to associate the door lock
code to an actuator configured
with the same
P address
of the
entrance panel.
An audible signal confirms the
new setting.
The setting of this function will also apply to the passepartout function.