24
3.4.3 Setting up a new door lock code
The menu can only be accessed if the door lock code function is enabled (P r 2.0);
otherwise the display will show the message E r 0 9.
Enter the SCS address the
door lock code must be
associated to.
Press OK to confirm.
Enter the new door lock
code (
4 digits
).
Set up another door lock
code, or finish.
Press OK; A beep confirms
the new setting.
To exit the menu press the
key with the KEY symbol.
If the sequence is wrong, or the door lock code is already being used for another address or as
passepartout, an error message will be displayed (see the dedicated section).
3 Configuration
