Figure 5-64
To synchronize the time with the network, perform the following steps:
1.
Choose
System > Date & Time
.
2.
Select
Sync from network
.
3.
From the
Primary NTP server
drop-down list, select a server as the primary server for time
synchronization.
4.
From the
Secondary NTP server
drop-down list, select a server as the IP address of the secondary
server for time synchronization.
5.
If you don’t want to use other NTP server, you need to enable
Optional ntp server
, and set a
server IP address.
6.
Set
Time zone
.
7.
Click
Submit
. As shown in Figure 5-65.
Figure 5-65
To set DST, perform the following steps:
1.
Choose
System
>
Date&Time
.
2.
Set
DST
enable.
3.
Set
Start Time
and
End Time
.
4.
Click
Submit
. As shown in Figure 5-66.
Summary of Contents for CP880-B LTE CPE
Page 1: ...CP880 B LTE CPE User Manual ...
Page 7: ...DNS Server and so on As shown in Figure 2 4 Figure 2 4 ...
Page 10: ...Figure 3 5 ...
Page 13: ...Figure 4 3 ...
