BTI Wireless CP880-B LTE CPE User Manual Download

Page: 22 / 53

LAN Setting

Setting LAN Host Parameters

By default, the IP address is 192.168.0.1 with a subnet mask of 255.255.255.0. You can change

the host IP address to another individual IP address that is easy to remember. Make sure that IP

address is unique on your network. If you change the IP address of the CPE, you need to access

the web management page with the new IP address.

To change the IP address of the CPE, perform the following steps:

Choose

Network

LAN Settings

In the

LAN Host Settings

area, set IP address and subnet mask.

In the

DHCP Setting

area, set the DHCP server to

Enable

Click

Submit

. As shown in Figure 5-14.

Figure 5-14

Configuration the DHCP Server

DHCP enables individual clients to automatically obtain TCP/IP configuration when the server

powers on. You can configure the CPE as a DHCP server or disable it. When configured as a DHCP

server, the CPE automatically provides the TCP/IP configuration for the LAN clients that support

DHCP client capabilities. If DHCP server services are disabled, you must have another DHCP server

on your LAN, or each client must be manually configured.

To configure DHCP settings, perform the following steps:

Choose

Network Setting

LAN Settings

Set the DHCP server to

Enable

Set

Start IP

address.

This IP address must be different from the IP address set on the

LAN Host Settings

area, but

they must be on the same network segment.

Set

End IP

address.

This IP address must be different from the IP address set on the

LAN Host Settings

area, but

they must be on the same network segment.

Set

Lease time

can be set to 1 to 10,080 minutes. It is recommended to retain the default

Summary of Contents for CP880-B LTE CPE






















































Search results

Summary of Contents for CP880-B LTE CPE

Reviews:

Related manuals for CP880-B LTE CPE

Brands by name

Popular brands

BTI Wireless CP880-B LTE CPE, User Manual

Search results

Summary of Contents for CP880-B LTE CPE

Reviews:

Related manuals for CP880-B LTE CPE

Brands by name

Popular brands