BTI Wireless CP880-B LTE CPE, User Manual

Page: 30 / 53

Figure 5-11
Setting Deny access network outside the rules
To set allow access network, perform the following steps:
1. Choose Firewall > IP Filtering .
2. Set
Deny access network
outside the rules.
3. Click
Submit
. As shown in Figure 5-41.
Figure 5-12
Adding IP Filtering rule
Add an IP address filtering rule, perform the following steps:
1. Choose Firewall > IP Filtering .
2. Click Add list .
3. Set
Service
.
4. Set Protocol .
5. In the
Source IP Address Range
box, enter the source IP address or IP address segment to
be filtered.
6. In the Source port range box, enter the source port or port segment to be filtered.
7. In the
Destination IP Address Range
box, enter the destination IP address or IP address
segment to be filtered.
8. In the
Destination port Range
box, enter the destination port or port segment to be
filtered.
9. In the Status box, choose a status the rule will be executed.
10. Click
Submit
. As shown in Figure 5-42.