BTI Wireless CP880-B LTE CPE User Manual Download Page 11

Page: 11 / 53

Update

4.1

Version Manager

This function enables you to upgrade the software version of the CPE to the latest version. It is

recommended that you upgrade the software because the new version, certain bugs have been

fixed and the system stability is usually improved.

Viewing Version Info

To view the version info, perform the following steps:

Choose

Update

Version Manager

In the

Version Info

area, you can view the product name and software version. As shown in

Figure 4-1.

Figure 4-1

Version Upgrade

To perform an upgrade successfully, connect the CPE to your computer through a network cable,

save the upgrade file on the computer, and make sure the CPE is not connected to anything other

than a power adapter and the computer.

To perform an upgrade, perform the following steps:

Choose

Update

Version Manager

In the

Version Upgrade

area, click

Browse

. In the displayed dialog box, select the target

software version file.

Summary of Contents for CP880-B LTE CPE






















































Search results

Summary of Contents for CP880-B LTE CPE

Reviews:

Related manuals for CP880-B LTE CPE

Brands by name

Popular brands

BTI Wireless CP880-B LTE CPE, User Manual

Search results

Summary of Contents for CP880-B LTE CPE

Reviews:

Related manuals for CP880-B LTE CPE

Brands by name

Popular brands