value.
6.
Click
Submit
. As shown in Figure 5-15.
Figure 5-15
DMZ Settings
If the demilitarized zone (DMZ) is enabled, the packets sent from the WAN are directly sent to a
specified IP address on the LAN before being discarded by the firewall.
To set DMZ, perform the following steps:
1.
Choose
Network > DMZ Settings.
2.
Set DMZ to
Enable
.
3.
(Optional) Set
ICMP Redirect
to
Enable
.
4.
Set
Host address
.
This IP address must be different from the IP address set on the
LAN Host
Settings
page, but they must be on the same network segment.
5.
Click
Submit
. As shown in Figure 5-18.
Summary of Contents for CP880-B LTE CPE
Page 1: ...CP880 B LTE CPE User Manual ...
Page 7: ...DNS Server and so on As shown in Figure 2 4 Figure 2 4 ...
Page 10: ...Figure 3 5 ...
Page 13: ...Figure 4 3 ...
