11
Digital DMR and Analog
UHF/VHF Two Way Radio
4. RADIO OVERVIEW
Record
Start/stop recording. When stop recording, the radio will remind repeat
or send the record.
Messages
In digital mode, press to enter into SMS messages
Dial
Start the manually dial
GPS Info
Check the GPS position information
Monitor
Monitor the weak signal or the signal with unmatched ID.
Main Choose Choose channel A or channel B as the main channel
Hot Key 1~6
Selects Hot Keys 1-6 Note: Hot key setup details on next page
Work Alone
Turn on/off the work alone function.
Nuisance Delete
During scanning, press the key to skip the unwanted channel
Digi Monitor
In DMR mode, press the key to turn on/off digital monitor
Sub Ch Switch Turn on/ off the sub channel
Prior Zone
Switch to Priority Zone
Program Scan
Press the key to start or stop the VFO scan.
The VFO scan start and end frequency should be set in CPS -Optional
Setting - VFO Scan.
Mic Feature
In digital channel, switch the microphone tone to normal or enhanced mode.
LastCall Reply In digital channel, press the key to access the last call and press PTT
to call back.
Switch ChType Switch the channel type(Analog, Digital, Ana+Dgi, Dgi+Ana)
Simp
Repeater
Enable / disable the simplex repeater function.
Ranging
When the radio receives a call and the suspension time is on, press
the key programmed as "Ranging" to obtain the caller's position and
distance. (Both party need GPS positioned, or will receive only GPS
information.)
CH Ranging
In standby, if the call contact type for a channel is "Private call" , press
the key programmed as "Channel Ranging" to turn on this function. The
radio will automatically start ranging function when turn to this channel.
