26
Digital DMR and Analog
UHF/VHF Two Way Radio
(2-11)
Key PF1, PF2, PF3, P1, P2
You can program these keys for different functions.(Refer to page 10 & 11)
4.Other Func
(1)
Auto Power Off
Allow to set automatic power off when not used for a period of 10 minutes,
30minutes, 1 hour or 2 hours of inoperation.
Off: Turn off the function.
(2)
TX Timer
30S-240S: The TX will be limited in the set time. When this time is reached,
the radio will auto stop transmission.
OFF: Turn off the TX time limit, and there is no limit for the transmission time.
(3)
TOT (Time Out Timer) Predict
With the "TOT Predict" function activated (On), 5 seconds before the TOT
expiring, a beep sound is preventing that soon the transmitting mode will
be interrupted.
(4)
TxPow ALC (Automatic Level Control)
With the“TxPow ALC” function activated (On), while receiving an extremely
strong signal, the TX power will automatically reduce the level of the TX
Power proportionally to the strength of the RX signal.
(5)
Freq Step
2.5K,5K,6.25K,10K,12.5K,20K,25K,30K,50K, total of 9 frequency steps.
(6)
Ana SQ Level
Adjusts the squelch level to receive signal with different signal strenghts, and
a total of 5 levels offered. This function is only valid for an analog channel.
(7)
Power Save
Turn on the function to extend the battery life.
Save 1:1, TX/RX 30ms, Standby 30ms.
Save 2:1, TX/RX 60ms, Standby 30ms
When turn on the power save, it may not receive the message in time.
(8)
TBST Sel
TBST frequency is used to activate some repeaters, 1000Hz, 1450Hz,
1750Hz, 2100Hz a total of 4 options are offered.
Press PTT and PF1 key together to transmit the TBST tone.
(9)
VOX
By enabling the VOX, you can speak into the microphone to start transmitting
7. MAIN MENU FUNCTIONS
