16
Digital DMR and Analog
UHF/VHF Two Way Radio
5. BASIC OPERATIONS
5.10 Making a Call
Method 1:
from the Channel switch.
Turn the channel switch to choose a programmed channel.
Method 2:
from the Talk Group.
(1)
Turn the channel switch to choose a programmed channel;
(2)
Press
(exit) key to enter the TG List, press the
/
key to
choose a TG.
Method 3:
from the keypad.
(1)
Turn the channel switch to choose a programmed channel.
(2)
Press
(Menu) key to Talk Group, press select to enter TG.
(3)
Press
/
key to Manual Dial, press Select.
(4)
Input the ID number by keypad, press
key to switch group ID or
Private DMR ID.
Hold the radio vertical 2.5-5cm from your mouth, press the [PTT] key to
start the call, the red LED lights up.
Release [PTT] key to receive the reply.
5.11 Monitor
In standby, press the [PF2] key to enter Monitor mode. When receiving
a matched carrier but the signaling / ID is unmatched or the signal is too
weak, this function allows you to monitor the weak signal and signal with
unmatched signaling / ID.
Press the [PF2] key again to shut off the speaker and return to standby.
5. BASIC OPERATIONS
5.9 Receiving and Responding to a Radio Call
When the radio is in the digital mode, it can receive and respond to a call
with the same frequency/color code/ slot. When receiving a call:
a.
If the radio is programed with callers DMR ID number in the digital
contact list, when receiving a call, the radio will ring or vibrate briefly.
b.
The blue LED lights up.
c.
The left top corner of LCD shows the
RSSI
icon, and the LCD display
will show DMR ID/name/city/state/country/call type and incoming icon
based on what is in the contact list.
d.
When the call is ended, it will display “Call end”, and you can press [PTT]
to respond the call.
