BTECH DMR-6X2 Operating Manual Download

Page: 46 / 53

Digital DMR and Analog

UHF/VHF Two Way Radio

Problems

Solutions

The radio cannot be switched
on or no display after being
switched on.

A. Battery pack may not be installed

properly. Remove the battery pack

and install it again.

Battery power may be insufficient.

Recharge or replace the battery

pack.

The battery doesn't last very
long after charging.

The battery is defective; please replace it
with a new battery pack.

Cannot talk to or hear other
members in your group.

Other voices from
non-group members are heard
on the channel.

Analog: Change the CTCSS/DCS
Tone, and make sure to change the tone
on all radios in your group.

1. Make sure the frequency and

CTCSS are the same as other

members.

2. Make sure you are within range,

and not too far away from your

member.

3. Make sure you are set in correct

digital mode, and frequency.

4. In digital mode, make sure

the correct Talk Group, Time

Slot, Color Code, and if used,

Encryption Code is set correctly.

5. In digital mode, make sure the

receive contact list, and receive

group list is set correctly if they

are used.

9. TROUBLE SHOOTING GUIDE

Summary of Contents for DMR-6X2






















































Search results

Summary of Contents for DMR-6X2

Reviews:

Related manuals for DMR-6X2

Brands by name

Popular brands

BTECH DMR-6X2, Operating Manual

Search results

Summary of Contents for DMR-6X2

Reviews:

Related manuals for DMR-6X2

Brands by name

Popular brands