manualshive.com logo in svg

BT Versatility, Manual

Share
Download
BT Versatility Manual Download Page 71

BT Versatility 
Owner's Manual

 

 

71

• 

If a Line is programmed to ring directly at your extension and your Voice Mailbox is turned 

on, dial the Line number. 

• 

If you do not have a Line ringing directly to your extension dial in on an Auto-attendant 

Line, and when you receive the Auto-attendant message dial your extension number. 

• 

Call in on a line which you know will be answered and have the call transferred to your 

Mailbox. 

• 

When answered by your voicemail greeting, access your Voice Mailbox by dialling the code 

711, followed by your extension number, Voicemail Password and #.

 

Then dial the following numbers to access your messages 

      While listening to the Greeting 

• 

Dial 1  Playback commences at the first message 

• 

Dial 91  Change the outgoing greeting 

• 

Dial 92  Check the outgoing greeting 

• 

Dial 93  Delete the outgoing greeting 

• 

Dial 0  Change Voicemail Password 

When playback of messages has commenced 

• 

Dial # Playback is paused 

• 

Dial 2 Save this message and move to the next message 

• 

Dial 3 Erase this message and move to the next message 

• 

Dial 4 Go back to the start of the message 

• 

Dial 5 Go back to the previous message 

• 

Dial 6 Erase all messages 

• 

Dial 7 Go back ten seconds 

• 

Dial 8 Go forward ten seconds / Skip the time stamp 

• 

Dial 9 Forward the message to another extension 

• 

Dial 0 Return Call. Automatically make a call to the caller who left the message (this feature 
is not applicable when mail box is accessed remotely).

 

 

Summary of Contents for Versatility































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands