BT Versatility
Owner's Manual
100
To programme MSN numbers with names and have them ring Extensions:
If your switch is equipped with P-MP Accesses then you programme MSN numbers.
•
From the Programming Extension, press the PROGRAMME Key
•
Press the Scroll Down Key (
Ô
) until ‘System programming’ is displayed.
•
Select ‘System programming’.
•
Enter the System Programming Password and select ‘Lines’.
•
Press the Scroll Down Key (
Ô
) until ‘ISDN programming’ is displayed.
•
Select ‘MSN Programming’. Only Accesses programmed as P-MP appear in this menu.
•
Select an Access
•
Indices 01-10 are presented for Access 1, Indices 11-20 for Access 2 up to Indices 71-80 for
Access 8. Either select an entry or dial the index.
•
Enter the MSN telephone number (as supplied by your Network Provider). A total of fifteen
digits can be entered
•
Select ‘Confirm’.
•
Enter a name as described on page 16 and press Confirm
•
Select Day Mode, night mode or both.
•
Select the Extension or Group the MSN Number is to call. The call can also be answered by
either Auto Attendant or Courtesy service by selecting the option at this stage.
Press the Hands-free Key to finish programming.
Note: CLI Store routing will take precedence over MSN/DDI routing or normal call routing.
Refer to page 38 for information on CLI Store.