manualshive.com logo in svg

BT Versatility, Manual

Share
Download
BT Versatility Manual Download Page 108

BT Versatility 

Owner's Manual 

 

108

The default is that all lines ring group 1 in both day and night modes. 
 

If the switch is equipped with a PRI Access and some Backup Lines are equipped then Incoming 
ringing is programmed as follows: 

• 

From the Programming extension, press the PROGRAMME key.    

• 

Press the Scroll Down key (

Ô

) until “System Programming” is displayed. 

• 

Select “System Programming”. 

• 

Enter the System Programming Password and select “Lines”. 

• 

Select “Incoming Ringing” option. 

• 

Select either 'PRI Access' or Line 31 - Line 34 or Access 1 - 2 

• 

Continue the programming as described above 

In the case of PRI the B-channels cannot be separated so the full PRI is programmed to ring an 

extension or group. It can also be programmed for Courtesy or Auto Attendant service. 
Note: 

Lines 31 - 34 or Access 1 - 2 are the backup lines. Only those equipped are displayed. 

No D-Channel backup is provided for the PRI Line. 

Outgoing Restriction 

Switch equipped with a PRI Access   

If the switch is programmed with a PRI Access only this option is not presented on the Line 
programming Menu. 

If the switch is equipped with Lines as backup 'Outgoing restriction' is programmed as follows: 

• 

From the Programming extension, press the PROGRAMME key.    

• 

Press the Scroll Down key (

Ô

) until “System Programming” is displayed. 

• 

Select “System Programming”. 

• 

Enter the System Programming Password and select “Lines”. 

• 

Press the Scroll Down key (

Ô

) until “Outgoing Restriction” is displayed. 

• 

Select “Outgoing Restriction” option. 

• 

The menu updates to show only the back up lines equipped (Line 31 - Line 34 or Access 1- 2) 

• 

Select the required line 

• 

The extension menu is displayed.  

• 

Select the extensions to be restricted from selecting the line for outgoing calls.  

• 

In default no restriction applies. 

Incoming calls only when PRI is programmed 

When Incoming calls only is selected when the switch is equipped with a PRI Access the display 

updates showing the B-Channels and backup lines and are programmed as follows: 

• 

From the Programming extension, press the PROGRAMME key.    

• 

Press the Scroll Down key (

Ô

) until “System Programming” is displayed. 

• 

Select “System Programming”. 

• 

Enter the System Programming Password and select “Lines”. 

• 

Press the Scroll Down key (

Ô

) until “Incoming Calls Only” is displayed. 

• 

Select “Incoming Calls Only” option. 

• 

The menu updates to show all B channels and the back up lines/Accesses 

• 

Select the required lines to be reserved for incoming calls only. 

• 

In default no lines are programmed. 

 

Note: 

If  12 B-Channels are available and  8 lines are selected then a total of  4  B-Channels 

are available to extensions to select for outgoing calls.  

If a user selects a Line key of a line that is set as Incoming only, busy tone is returned and the 
message 'Restricted' is shown on the display. 

Summary of Contents for Versatility































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands