BT IMAGE 370 User Manual Download Page 23

Page: 23 / 70

Memos

A personal memo can be recorded using your
Image 370’s handset and left as a message for
another user.

To record a memo

•

Press the

MEMO

button, display shows

LIFT

HANDSET

•

Lift the handset and speak clearly into it to
record your message. The displays shows

RECORDING

and the elapsed recording

time.

•

To stop recording replace the handset.

To play back, skip through or delete memos

Memos are played and deleted in the same way
as incoming messages (see incoming
messages page 21).

Memos can be recorded in any receive mode.

The recording time allowed is the same as that
allowed for an incoming message.

Call screening

This facility (pre-set to

OFF

) allows you to

listen, via the in-built speaker, to messages as
they are being recorded. If during the message
you decide to take the call, lift the handset and
speak to the caller. The answering machine
will automatically stop recording.

To switch call screening on/off

•

Press the

SET UP

button, display shows

SET

RESOLUTION

•

Press the

button until the display

shows

ANSWERPHONE

•

Press the

button, display shows

OGM

•

Press the

button until the display

shows

TAD MONITOR

•

Press the

button, display shows

OFF

•

Use the

buttons to switch between

OFF

and

•

When the option you want is displayed press
the

button to confirm the setting,

display shows

SILENCE DETECTOR

•

Press the

STOP

button twice to return to

standby mode.

Using the answering

machine

MEMO

SET UP

You can adjust the speaker volume during call
screening using the

and

buttons.

Summary of Contents for IMAGE 370







































































Search results

Summary of Contents for IMAGE 370

Reviews:

BT IMAGE 370, User Manual, Page: 23 / 70

Search results

Summary of Contents for IMAGE 370

Reviews: