manualshive.com logo in svg

BT IMAGE 370, User Manual, Page: 22 / 70

Share
Download
BT IMAGE 370 User Manual Download Page 22

To delete messages

•

Press the 

DELETE

button whilst a message

is playing or whilst the display shows

DELETE

or 

NEXT

just after the message. The

message is marked for deletion.

•

When all messages have been played back
the display shows: 

FINISHED

and counts

down from 8 to 0. Any messages which have
been marked for deletion are automatically
deleted at the end of the countdown.

•

If you press the 

DELETE

button whilst the

display shows 

FINISHED,

all messages will be

marked for deletion and automatically deleted
at the end of the countdown.

•

If you press the 

STOP

button at anytime

during playback or whilst the display shows

FINISHED

, marked messages will not be

deleted.

When the display shows DELETE OR NEXT
your Image 370 will pause for a few seconds
before playing back the next message. To skip
directly to the beginning of the next message
press the 

©©

button.

To change the recording time limit

Your Image 370 has a total recording time of
approximately 15 minutes. To make efficient
use of this time your Image 370 is pre-set to
limit the individual message recording time to
1 minute. This time limit can be changed or
switched off.

•

Press the 

SET UP

button, display shows 

SET

RESOLUTION

.

•

Press the 

§

or 

©

button until the display

shows 

ANSWERPHONE

.

•

Press the 

button, display shows 

OGM

.

•

Press the 

§

or 

©

button until the display

shows 

MSG. LIMIT

.

•

Press the 

button, display shows 

1

MINUTE

.

•

Use the 

§

or 

©

buttons to display the

available options. The options are:

1 MINUTE

3 MINUTE

NO LIMIT

When the option you want is displayed press
the 

button to confirm the setting,  display

shows 

TAD MONITOR

.

•

Press the 

STOP

button twice to return to

standby mode.

Pressing the STOP button at any time during
playback of messages cancels playback without
deleting any messages.

22

Using the answering
machine

DELETE

SET UP

Summary of Contents for IMAGE 370







































































Reviews:

No comments