manualshive.com logo in svg

BT IMAGE 370, User Manual, Page: 21 / 70

Share
Download
BT IMAGE 370 User Manual Download Page 21

•

If you want to play the message again or play
another outgoing message, press the 

§

or 

©

button until display shows 

OGM

- press 

and repeat the above procedure.

•

Press 

STOP

twice to return to standby mode.

To switch the answering machine on/off

If your Image 370 is set to ANS/FAX the
answering machine is ON. When the
answering machine is on the LED in the

ANSWER

button will be lit.

The answering machine can be switched on or
off by pressing the 

ANSWER

button.

Incoming messages

An incoming message is the message a caller
leaves on your answering machine if you are
not able to take the call yourself. Memos are
similar to incoming messages but are recorded
using your Image 370’s handset (see ‘memos’
page 23).

To receive incoming messages your Image 370
must be set to ANS/FAX mode (see page 18).

Message indicator

When a new message has been left on your
Image 370 the red light on the 

PLAY

button

will flash.

When the answering machine is switched off
using the ANSWER button the receive mode will
revert to the previous setting.

The number of messages is shown in the left
hand side of the display (this number includes
new messages and any old messages which
have not been erased).

To play back messages

When playing back messages the oldest
message will always be played first.

•

Press the 

PLAY

button to begin playing back

your messages. During playback display
shows the message number and the date and
time the message was left.

During playback:

•

Press the 

PLAY 

button to pause and again 

to resume.

•

Press the 

©©

button once to skip to the

beginning of the next message.

•

Press the 

§§

button once to skip back to

the beginning of the message being played.

•

Press the 

§§

button twice to skip back to

the beginning of the previous message.

If the message being played is a new message an

N

is shown in the display after the message

number.

Messages can be played back in any receive mode.

21

Using the answering

machine

■

 

PLAY l l

■

 

PLAY l l

I

§§

I

§§

ANSWER 

■    

●

Summary of Contents for IMAGE 370







































































Reviews:

No comments