BSVILLAGE MTF, Manual, Page: 27 / 36

EN - 27
TIGHTENING ALL THE SCREWS ON THE BICYCLE TIGHTENING ALL THE SCREWS ON THE BICYCLE TIGHTENING ALL THE SCREWS ON THE BICYCLE TIGHTENING ALL THE SCREWS ON THE BICYCLE
Stem, handlebars, brake levers, bottle holder, saddle tube screw, brake arm screws, rear derailleur
collar and derailleur screw, screws on the front derailleur, etc. – never exceed the recommended torque
specified directly on the individual components – this may cause irreversible damage, particularly to
carbon fibre components and parts.
Check that the chainset has all the required screws and that these are tightened properly, particularly
the bolt that attaches the crank arm to the axis. If the crank arm comes loose from the axle, you must
IMMEDIATELY stop and repair the defect, otherwise, even a short ride with a “loose” crank arm may
cause irreversible damage to the crank arms. The tightness of attachment of the pedals to the crank arm
must be checked in the same manner.
TABLE
TABLE TABLE
TABLE OF
OF OF
OF TORQUES FOR INDIVIDUAL COMPONENTS
TORQUES FOR INDIVIDUAL COMPONENTS TORQUES FOR INDIVIDUAL COMPONENTS
TORQUES FOR INDIVIDUAL COMPONENTS
Component Screw connection * Nm
Crank arms Crank arm attachment screw (with square head, without lubrication)
Crank arm attachment screw (lubricated octalink)
Chain wheel screw 34 - 44
35 - 50
8 - 11
Bottom bracket Sealed cartridge in a shell
Bowl and retaining ring 49 - 69
49 - 78
Pedals Axle 34
Shoes Case screws
Pin 5 - 8
4
Brakes Securing screw for attachment to the frame (V-brakes)
Rotating pin (cantilever brakes)
Cable securing screw
Brake pad securing screw
Securing screw for inserting brake pad facing 5 - 9
8 - 10
6 - 8
5 - 7
1 - 2
Rear derailleur
(rear gear changer)
Assembly screw (bracket screw)
Cable securing screw
Cage with pulley screw 8 - 10
4 - 6
3 - 4
Front derailleur
(front gear changer)
Assembly screw
Cable securing screw 5 - 7
5 - 7
Brake and gear
shift lever Brackets securing screw (socket head)
Bracket installation screw (screwdriver)
Stop installation screw (frame) – screwdriver
Gear shift securing screw 6 - 8
2.5 - 3
1.5 - 2
2.5
Hub Quick-release mechanism lever
Nut for adjusting the bearings of the quick-release mechanism hub 9 - 12
10 - 25
Freewheel hub Freewheel securing screw
Freewheel nut securing screw
Chainset cassette retaining ring 35 - 49
35 - 44
29 - 49
Stem Handlebar clamping screw (M5)
Handlebar clamping screw (M6)
Stem cone expander
A headset for securing the fork (M5)
A headset for securing the fork (M6)
Securing screw on stems with adjustable angle
10-12
14-16
19,6
10-12
14-16
11-12
Saddle tube Saddle screw (dual screw system) M5/M6
Saddle screw (single screw system) M7/M8
Saddle clamp 9-11
16-19
12
Bottle holder Screws 5
* According to the technical documentation and promotional materials of the component manufacturers.