18
Assembly instructions Support frame for suspended fireplaces (1.0)
© 2015 Brunner GmbH
- Affix the top door frame
Note:
Before affixing the top door frame check the height from finished floor to
firetable top in various places and readjust if necessary. After fixing the
door frame the height adjustment is not possible anymore!
Drilling holes through girders left and right in the center of holes (
point 41) in top door frame. Drill horizontally (work precisely) and
attach on both sides with M12x80 bolts and nuts. Put a B13 washer be-
tween the top door frame and the girder in order to compensate the differ-
ence in width of the fireplace insert and the girders.
Illustr. 29: Drilling through gird-
ers
Illustr. 30: Tightening the
M12x80 screw
Finally, remove the mounting aid screws (
- 31) on both sides. This will cease the
connection between the fireplace and the top
door frame – thermal expansion of the fireplace
insert do not have any effect on the door frame
and the fireplace cladding.
Illustr. 31: The connection
between top door frame
and fireplace is lost af-
ter the screws 31 are re-
moved
