© 2015 Brunner GmbH
Assembly instructions Support frame for suspended fireplaces (1.0)
11
4. Attach the back plate
After height adjustment, the back plate is at-
tached to both girders. Use the 8 bolts M12x80
(
- 1.5), but the necessary holes in
the girders must be drilled first. Drill from inside –
you can use the already provided 12mm holes in
the back plate for positioning. Put the bolts from
outside and secure with nut and washer.
Illustr. 10: Drilling of holes
from inside
Illustr. 11: 2 bolts M12x80
per mounting face
5. Complete the connecting rod assembly
The parts used for height adjustment – turnbuckles and hooks – (see point
3.) must be removed along with the M10 threaded rods. The turnbuckles
and hooks are needed later for mounting the top door frame.
