14
Assembly instructions Support frame for suspended fireplaces (1.0)
© 2015 Brunner GmbH
9. Adjust the fireplace to level
The fireplace actually rests on the transversal
strut only. Using the adjusting screws at the back
plate, adjust the fireplace vertically. Finally, turn
the adjustable feet at the rear to expose 41 mm
of them. Check the height and level – adjust if
necessary.
Caution: Adjust the feet only when the se-
curing brace (see point 8) is mounted! When
the securing brace is not mounted, there is
a risk that the transversal strut will detach
from the back plate guides and the fireplace
falls down! Turn the adjustable feet to expose
them for max. 55mm (dimension 'H-Fuß' <
55mm).
Illustr. 17: Position of the
adjustment screw (De-
tail O on picture: 'Support
frame with back plate and
suspended fireplace'
10. Mount the top door frame
Designation of components
Illustr. 18: Mounting of top door
frame/support
Illustr. 19: Detail K
