20
Assembly instructions Support frame for suspended fireplaces (1.0)
© 2015 Brunner GmbH
3 = Hanging console
4 = M12x80 bolt
5 = M12 nut
6 = Supporting bracket
7 = M14x30 screw
F = Firetable
U = Substructure
The firetable support should be welded (contin-
uously, if possible) to the girders on both sides.
Prepare surface before welding (remove paint).
Illustr. 34: Welding posi-
tions
12. Mounting and leveling of firetable con-
soles to the firetable support beam
- 3) should be cut
to desired length, depending on the width of
firetable.
Arrange the consoles in even steps on the
firetable support beam and set in level. Welding
of consoles – the welding spots should be free
from paint too.
Illustr. 35: Leveling of con-
soles and affixing for weld-
ing
13. Construction of firetable
The necessary substructure for the firetable is
set onto the consoles. The height is only approx.
70mm – depending on the height setting choice.
Illustr. 36: Firetable sec-
tion
