BRP Can-Am OUTLANDER 400 EFI 2014 Operator'S Manual Download

Page: 35 / 164

OPERATION WARNINGS

1-UP Models Only

WARNING

POTENTIAL HAZARD

Stalling, rolling backwards or improperly dismounting while climbing a hill.

WHAT CAN HAPPEN

Could result in vehicle overturning.

HOW TO AVOID THE HAZARD

Use proper gear and maintain steady speed when climbing a hill.

If you lose all forward speed:

Keep your weight uphill. Never open the throttle suddenly or make sudden
gear changes. The vehicle could flip over backwards.

Apply the brakes.

Lock parking brake after you have stopped.

Dismount on uphill side, or to a side if pointed straight uphill.

If you begin rolling backwards:

Keep your weight uphill. Never open the throttle suddenly or make sudden
gear changes. The vehicle could flip over backwards.

Never apply the rear brake while rolling backwards.

Apply the front brake gradually.

When fully stopped, apply rear brake as well and lock parking brake.

Dismount on uphill side, or to a side if pointed straight uphill.

Turn the vehicle around and remount, following the procedure described
further in this Operator's Guide.

________

SAFETY INFORMATION

________

Summary of Contents for Can-Am OUTLANDER 400 EFI 2014





































































































































































Search results

Summary of Contents for Can-Am OUTLANDER 400 EFI 2014

Reviews:

Related manuals for Can-Am OUTLANDER 400 EFI 2014

Brands by name

Popular brands

BRP Can-Am OUTLANDER 400 EFI 2014, Operator'S Manual

Search results

Summary of Contents for Can-Am OUTLANDER 400 EFI 2014

Reviews:

Related manuals for Can-Am OUTLANDER 400 EFI 2014

Brands by name

Popular brands