BRP Can-Am OUTLANDER 400 EFI 2014, Operator'S Manual

Page: 86 / 164

CONTROLS/INSTRUMENTS/EQUIPMENT
The integrated backrest supports his
back during the ride.
vmo2008-016-005_b
1. Passenger's seat
2. Integrated backrest
Passenger's Seat Removal
Pull one of the passenger's seat han-
dles. Those handles are located under-
neath the RH and LH rear end of seat.
vmo2006-008-009_a
LH SIDE SHOWN
1. Seat latch
Gently lift seat rearwards.
Continue lifting movement until you
can release the retaining device then
completely remove passenger's seat.
Passenger's Seat Installation
Insert passenger's seat positioning
tubes into rear fender provided holes.
vmo2006-008-010_a
TYPICAL
1. Holes for passenger's seat positioning tubes
When seat rests in its position, firmly
push seat down to latch.
NOTE: A distinctive snap will be felt.
Double check that the seat is secure by
giving it a tug to confirm proper latch-
ing.
WARNING
It is of the upmost importance for
the passenger's safety that you
confirm that the passenger's seat
is properly locked in position by
pulling back and up several times.
17) Storage Box
2-UP Models
WARNING
Never operate the vehicle without
storage box properly installed.
The storage box is used to convert a
two-rider vehicle (2-UP model) to a
one-rider vehicle (1-UP model) with ex-
tra cargo capacity.
84
______________