BRP Can-Am OUTLANDER 400 EFI 2014 Operator'S Manual Download

Page: 109 / 164

MAINTENANCE PROCEDURES

Air Filter Installation

Properly reinstall removed parts in the
reverse order of their removal.

Air Filter Housing

Air Filter Housing Inspection and
Draining

Periodically inspect air filter housing
drain tube for liquids or deposits.

vmo2008-019-034_a

RH SIDE OF VEHICLE

1. Drain tube

vmo2008-019-021_a

1. Air filter housing
2. Drain tube
3. Clamp

NOTE:

If vehicle is used in dusty area,

inspect more frequently than specified
in

MAINTENANCE SCHEDULE

If liquids/deposits are found, squeeze
and remove the clamp. Pull drain tube
out and empty it.

NOTICE

Do not start engine when

liquids/deposits are found in the
drain tube.

When liquids/deposits are found, the
air filter must be inspected/dried/
replaced depending on its condition.

Remove air filter as explained in

AIR

FILTER REMOVAL

Fuel Tank Breather Filter

Fuel Tank Breather Filter
Replacement

1. Remove seat.

2. Locate fuel tank breather filter.

vmo2011-006-100_a

1. Fuel tank breather filter

3. Remove filter by carefully cutting

hoses at both ends.

vmo2011-006-101_a

TYPICAL - CAREFULLY CUT HOSE

1. Cutting tool

4. Replace both hoses on fuel tank

breather line.

5. Install a

new

filter with the arrow

pointing towards the outside of ve-
hicle.

______________

107

Summary of Contents for Can-Am OUTLANDER 400 EFI 2014





































































































































































Search results

Summary of Contents for Can-Am OUTLANDER 400 EFI 2014

Reviews:

Related manuals for Can-Am OUTLANDER 400 EFI 2014

Brands by name

Popular brands

BRP Can-Am OUTLANDER 400 EFI 2014, Operator'S Manual

Search results

Summary of Contents for Can-Am OUTLANDER 400 EFI 2014

Reviews:

Related manuals for Can-Am OUTLANDER 400 EFI 2014

Brands by name

Popular brands