BRP Can-Am OUTLANDER 400 EFI 2014 Operator'S Manual Download

Page: 126 / 164

MAINTENANCE PROCEDURES

Place a support under vehicle.

Remove nuts then remove wheel.

At installation, it is recommended to
apply anti-seize lubricant on threads.

Carefully tighten nuts in a criss-cross
sequence then apply final torque. Re-
fer to the following table.

WHEEL NUT TORQUE

100 N•m ± 10 N•m (74 lbf•ft ± 7 lbf•ft)

NOTE:

Occasionally,

wheel

nuts

should be removed to apply anti-seize
lubricant on studs to ease future re-
moval. This is particularly important
when vehicle is used in salt-water en-
vironment or in mud. Remove one nut
at a time, lubricate then retorque.

NOTICE

Always use the recom-

mended wheel nuts according to the
type of wheel. Using a different nut
could damage the rim.

V07

04Y

TYPICAL — STEEL WHEEL

1. Taper side of nut (opened end type)

vmo2008-001-002_a

TYPICAL — ALUMINUM WHEEL

1. Wheel nut (closed end type)

Suspension

Front Suspension Lubrication

Lubricate front A-arms at grease fit-
tings.

SUSPENSION GREASE

BRP

recommended

product

SUSPENSION

GREASE

(P/N 293 550 033)

Suspension Inspection

Shock Absorbers

Inspect shock absorbers for oil leaks or
other damage.

Check tightness of fasteners. See an
authorized Can-Am dealer as neces-
sary.

Ball Joints

Inspect ball joint boots for cracks.

WARNING

The ball joint must be replaced if
the boot is cracked.

Front A-Arms

Check A-arms for cracks, bending or
other damage.

See an authorized Can-Am dealer as
necessary.

124

______________

Summary of Contents for Can-Am OUTLANDER 400 EFI 2014





































































































































































Search results

Summary of Contents for Can-Am OUTLANDER 400 EFI 2014

Reviews:

Related manuals for Can-Am OUTLANDER 400 EFI 2014

Brands by name

Popular brands

BRP Can-Am OUTLANDER 400 EFI 2014, Operator'S Manual

Search results

Summary of Contents for Can-Am OUTLANDER 400 EFI 2014

Reviews:

Related manuals for Can-Am OUTLANDER 400 EFI 2014

Brands by name

Popular brands