BRP Can-Am OUTLANDER 400 EFI 2014 Operator'S Manual Download

Page: 104 / 164

MAINTENANCE SCHEDULE

MAINTENANCE SCHEDULE

25 h or 750 km (500 mi)

50 h or 1500 km (1000 mi)

100 h or 1 year or 3000 km (2000 mi)

200 h or 2 years or 6000 km (4000 mi)

A:
C:

Adjust
Clean
Inspect
Lubricate
Replace

To be performed by

PART/TASK

LEGEND

FUEL SYSTEM

Throttle body

I, L

Dealer

Throttle cable

I, A,

Dealer/

Customer

Fuel lines, connections and fuel
tank pressure test

Dealer

Fuel pump pre-filter

(4)

Dealer

Fuel pump pressure test

(4)

Dealer

Fuel tank breather filter

(4)

Customer

(4) More often under severe use
such as dusty area, sand, snow,
wet or muddy conditions.

ELECTRICAL SYSTEM

Spark plug

(5)

Customer

Battery connections

Customer

ECM connectors (visual inspection
without disconnecting)

Dealer

Electrical connections and
fastening (ignition system,
starting system, fuel injectors
etc.)

Dealer

Headlights beam aiming

Customer

(5) Make sure the spark plug is
correctly gapped.

CVT TRANSMISSION

Drive belt

Dealer

Drive and driven pulleys
(including one-way bearing)

I, C,

Dealer

CVT air inlet/outlet duct
condition/cleanliness

I, C

Dealer

—

DRIVE SYSTEM

4 x 4 coupling unit

Dealer

Drive shaft joints

Dealer

Rear propeller shaft joint

I, L

(4)

Dealer

Front/rear differentials
(oil level, seals and vents)

Dealer

(4) More often under severe use
such dusty area, sand, snow,
wet or muddy conditions.

102

______________

Summary of Contents for Can-Am OUTLANDER 400 EFI 2014





































































































































































Search results

Summary of Contents for Can-Am OUTLANDER 400 EFI 2014

Reviews:

Related manuals for Can-Am OUTLANDER 400 EFI 2014

Brands by name

Popular brands

BRP Can-Am OUTLANDER 400 EFI 2014, Operator'S Manual

Search results

Summary of Contents for Can-Am OUTLANDER 400 EFI 2014

Reviews:

Related manuals for Can-Am OUTLANDER 400 EFI 2014

Brands by name

Popular brands