Brouwer Kesmac 4000 R Series, Operator'S Manual

Page: 55 / 161

Set-Up Screen.
•
Button ‘2’. Allows the operator to Select the
Current Pallet Configuration by
using the Left and Right Arrow buttons.
Selection only allowed when the current
Positions on the Pallet are ‘
0 ’.
•
Button ‘3’. Selects the Units displayed. Imperial or
Metric.
•
Button ‘4’. Opens the Warm Up Screen.
•
Button ‘5’. Key- backlight adjustment.
•
Button ‘6’. Press and Hold to Toggle between Service/
Shipping Mode - ‘ON’ or ‘OFF’.
Service/Shipping Mode:
I. Must be ‘ON’. When disconnecting any sensors
for service or machine shipping purposes.
II. ‘OFF’ Default. Normal operations. If ’ OFF ’ and
machine system power is ‘ ON ’, if there are any
sensors disconnected they will ‘ Fault ’ and Lose
Calibration Values, and will require recalibration .
•
Button ‘7’. Opens the Strobe Light Menu which
allows the operator to have the Strobe
Lights ‘ON’ or ‘OFF’ during Harvest and
Transport Modes.
•
Button ‘8’. Enables the adjustment of Display Screen
Brightness –‘0’ to ‘100%’. Pressing and
holding the Right Arrow Button will switch
the Brightness Control to Auto Mode.
Warm-Up Screen.
•
Button ‘1’. Will send the machines components to their
Home/Ready positions and enter its
‘Ready’ state.
•
Button ‘4’. Enables the adjustment of the Warm Up
time.
•
Button ‘8’. Press and Hold to turn the Warm Up Function
‘ON’ or ‘OFF’.
Fault Screens.
There are two Fault Screens.
Page 1 of 2 Displays the Fault Status of the machines
Inputs and CAN Buses
.
Page 2 of 2 Displays the Fault Status of the machines
Outputs.
•
Green Box = OK Status
•
Red Box = Fault Active Status.
•
Not Cal. = Component Not calibrated.
OPERATION
Set –Up Screen
Strobe Light Menu
Warm –Up Screen
Faults Screen. 1of 2
Faults Screen. 2of 2
3-17