Brouwer Kesmac 4000 R Series, Operator'S Manual

Page: 47 / 161

OPERATION
HARVESTING. …cont
•
Machine must be in ‘READY’ state.
Increase engine RPM, then from the Harvest
Screen press display Button ‘
1 ’. Machine will
now position/move components to their Home/
Ready positions and enter its ’READY’ state.
•
Press and hold display Button ‘ 4 ’, from Harvest
Screen, to insert pallet onto Forks. Release
Button once sequence has started.
Machine Adjustments.
•
Ensure the ‘Position’ and ‘Index Counts’ on the display
match the machines current counts.
•
To change the ‘Position’ and ‘Index Counts’ enter the
‘
STACK SELECT ’ Pop-Up Menu by pressing Button ‘ 3 ’.
Scroll ‘
UP ’ or ‘ DOWN ’ using the ‘ UP ’ –‘ DOWN arrows
buttons, to ‘Position’ or ‘Index Count ‘and adjust to
correct value, or press Button 7.
To
Increase – press right arrow button.
Decrease – press left arrow button.
Harvest Initializing.
Aligning Machine to Cut Line.
•
Lower the Conveyor , Pad ‘ A ’, until the Conveyor
‘ DOWN ’ Position Indicator on the display is ’ ON ’,
keeping the Cutter Head off the ground.
•
Turn the Auto Steer ‘ ON ’, Button ‘ B ’. When the Auto
Steer Ski is adjacent to the Cut Line continue driving
forward until the Cutter Head Blade is in the desired
position.
NOTE
The Auto Steer will not turn ‘ ON ’ if the Conveyor
‘ DOWN ’ position Indicator is ‘ OFF ’.
Press Button ‘ B ’ to toggle the Auto Steer ‘ ON-OFF’ .
Use Pad ‘ A ’ on Control Handle to raise the Conveyor/
Cutter Head.
3-09