Brouwer Kesmac 4000 R Series, Operator'S Manual

Page: 93 / 161

ELECTRICAL SYSTEM
System Controller ‘A’. Cab Display
If !!NO CAN BUS!! is displayed it indicates one of the following :
1.
•
Loss of power to Controller No.4 (see P5-02).
Check the LED lamp on the Controller. If it is
‘ON’ the Controller may be faulty.
If the LED lamp is not ‘
ON ’, check the wiring to
the controller to restore power.
2. Cab Display.
•
Loss of signal from the controller to the display.
If the above checks fail to restore functions, call your Dealer
or the factory Service Department.
Control Console.
Underside wiring.
1.
Control Handle.
2. Auto-Steer Fine Adjust Potentiometer.
3. Cutter Speed Potentiometer.
4. Conveyor Speed Potentiometer.
5. E-STOP Switch.
6. 8 Button Key Pad Connection.
7. Engine RPM Control.
Control Console – Underside.
5-05