Brother TJ-4420TN User Manual Download Page 88

Page: 88 / 92

Problem

Possible Cause

Solution

The media is not fed

correctly.

Make sure the Front Label Guide touches

the edge of the Media Guide Tips.

RTC time is incorrect when

rebooting the printer.

The coin battery has

dislodged.
The coin battery has finished.

Contact the product manufacturer's

customer service or your local dealer.

The left side printout position

is incorrect.

The label size is set up

incorrectly.

Set the correct label size.

The Shift X setting is

incorrect.

Fine-tune the Shift X setting. For more

information, see

7.1.1 FBPL Settings

The printing position of small

labels is incorrect.

The media sensor sensitivity

is not set correctly.

Calibrate the sensor sensitivity again.

The label size is incorrect.

Set the correct label size and gap size.

The Shift Y setting is

incorrect.

Fine-tune the Shift Y setting. For more

information, see

7.1.1 FBPL Settings

The vertical offset setting in

the driver is incorrect.

If using the BarTender software, set the

Vertical Offset in the driver.

Summary of Contents for TJ-4420TN





























































































Search results

Summary of Contents for TJ-4420TN

Reviews:

Related manuals for TJ-4420TN

Brands by name

Popular brands

Brother TJ-4420TN, User Manual

Search results

Summary of Contents for TJ-4420TN

Reviews:

Related manuals for TJ-4420TN

Brands by name

Popular brands