Brother TJ-4420TN User Manual Download Page 78

Page: 78 / 92

Item

Description

Print Head Maintn

Check the Print Head status and maintenance notifications.

Item

Description

Warning

Enable or disable the Print Head cleaning warning. If

this setting is enabled and the Print Head has

reached the setting mileage limit, a warning appears

on the screen to remind you to clean the Print Head.

The default setting is "Disable".

Reset

Counter

Reset the Print Head mileage warning after the Print

Head has been cleaned.

Interval

Set the mileage for when to display the Print Head

cleaning warning. You must enable the “TPH

warning lock” to use it. The default setting is 1 km.

Key Sound

Enable or disable the button press sound.

Contact Us

Displays a QR code to access the Brother Support website at

support.brother.com

using a mobile device.

7.5 File Manager

Check the printer's available memory, show the files list, delete the files, or run the files that

are saved in the printer's DRAM/Flash/Card memory.

Menu

File Manager

DRAM

FLASH

CARD

Summary of Contents for TJ-4420TN





























































































Search results

Summary of Contents for TJ-4420TN

Reviews:

Related manuals for TJ-4420TN

Brands by name

Popular brands

Brother TJ-4420TN, User Manual

Search results

Summary of Contents for TJ-4420TN

Reviews:

Related manuals for TJ-4420TN

Brands by name

Popular brands