Brother TJ-4420TN User Manual Download Page 67

Page: 67 / 92

Setting

Description

Print Mode

Set the Print Mode.

Print Mode

Description

Batch Mode

When the image is printed, the Gap/Black Mark is fed

through the tear plate for tear away.

None

The top of the next label is aligned with the Print

Head burn line (Tear Off Mode).

Cutter Batch

Cuts the label once at the end of the printing job.

Rewinder Mode Enables Rewinder Mode.

Peeler Mode

Enables Peeler Mode.

Cutter Mode

Enables Cutter Mode.

Offset

Fine-tune the media stop location. Settings range from -999 dots to 999

dots.

Shift X

Fine-tune the print position. Settings range from -999 dots to 999 dots.

Shift Y
Reference X

Set the origin of the printer coordinate system horizontally and vertically.

Settings range from 0 dots to 999 dots.

Reference Y
Code Page

Set the international character set code page.

Country

Set the country code. Settings range from 1 to 358.

Note

If printing from the downloaded software/driver, the software/driver commands will overwrite the

Printer settings.

Summary of Contents for TJ-4420TN





























































































Search results

Summary of Contents for TJ-4420TN

Reviews:

Related manuals for TJ-4420TN

Brands by name

Popular brands

Brother TJ-4420TN, User Manual

Search results

Summary of Contents for TJ-4420TN

Reviews:

Related manuals for TJ-4420TN

Brands by name

Popular brands