III - 37
[5]
Reassembling the Upper Cover and the Under Cover
(1) Insert the tape sensor PCB ASSY into the insert guide.
NOTE 1:
Insert the tape sensor PCB ASSY until it hits the groove of the insert
guide.
NOTE 2:
Confirm that you can see the tape sensor PCB ASSY from the hold of
the insert guide.
NOTE 3:
Fold the flat cable after assembling the tape sensor PCB ASSY.
Fig. 3.5-16 Reassembling the Upper Cover and the Under Cover (1)
Tape sensor PCB ASSY
Groove
Insert guide
Groove
Tape sensor PCB ASSY
Insert guide
Flat cable
