1 - 17
1.4.7
Adjustment print test (Continuous)
In this inspection, Serviceman Software Tool adjusts the top margin for the free length
tape.
Start the inspection in the state of setting the free length tape (62mm) which used in
the cut test.
(1) Change the background of “Adjustment print test (Continuous)” item into yellow
with the [Up] / [Down] buttons or the [
↑
] / [
↓
] keys on the keyboard. And then
click the [Run] button.
(2) If the adjustment of the margin is started, the “Adjust print” screen is displayed
and the test pattern is printed.
NOTE:
Click the [NG] button to stop the printing on the way.
Fig. 26 Continuous print pattern (62mm)
(3) If the test pattern is printed, the OK/NG dialogue is displayed.
Measure whether the top margin is the specified value “3±0.5mm”.
NOTE:
The cutting is performed automatically after printing.
Fig. 27 OK/NG dialogue
Printing direction
3±0.5mm
