1 - 16
1.4.6
Cut test
Check that the tape is fed and cut correctly.
Set the free length tape (62mm) into the machine and close the top cover ASSY, and
then start the inspection.
(1) Change the background of “Cut test” item into yellow with the [Up] / [Down]
buttons or the [
↑
] / [
↓
] keys on the keyboard. And then click the [Run] button.
NOTE:
When the machine is entered in the inspection state, the Status LED
does not change even if open and close the top cover ASSY.
(2) If the “Press Feed Key!!” is displayed on the “Results” column in the main screen,
check that the free length tape (62mm) is set into the machine. And then push the
[Feed] button on the machine.
NOTE:
Click the [Stop] button when stopping.
Fig. 24 Checking “Feed”
(3) If the feeding of the machine is performed correctly and the “Press Cut Key!!” is
displayed on the “Results” column in the main screen, push the [Cut] button on
the machine.
NOTE:
Click the [Stop] button when stopping.
Fig. 25 Checking “Cut”
(4) Shift to the next inspection if the cutting of the machine is performed correctly.
