III - 27
[ 8 ] Installing the Roller Holder Release Spring, the Roller Holder ASSY,
the Cutter Lever Spring and the Cutter Lever
(1) Insert the end "a" of the roller holder release spring into the guide groove of the
roller holder ASSY and set it.
(2) Insert the roller holder ASSY into the shaft of the bottom cover, and hang the end
"b" of the roller holder release spring on the rib of the bottom cover.
(3) Set the cutter release spring to the cutter lever, and hang the end "c" of the cutter
release spring on the rib of the cutter lever.
(4) Set the cutter lever to the bottom cover, and hang the end "d" of the cutter release
spring on the rib of the bottom cover.
Figure 3.1-27 Installing the Roller Holder Release Spring, the Roller Holder ASSY,
the Cutter Lever Spring and the Cutter Lever
Bottom cover
Bottom cover
Roller holder ASSY
Roller holder release spring
Cutter lever spring
Cutter lever spring
Cutter lever
Cutter lever
End "a"
Guide
Groove
Guide Groove
End "b"
End "a"
End "c"
Rib
Rib
End "d"
Shaft
Rib
Summary of Contents for PT1090 - P-Touch - Labelmaker
Page 1: ...SERVICE MANUAL MODEL PT 1090 ...
Page 7: ...I 3 Figure 1 1 2 Display and Key Arrangement USA version EUROPE version ...
Page 74: ...A 1 Appendix 1 Main PCB Circuit Diagram NAME CODE MAIN PCB CIRCUIT DIAGRAM PT1090 LW4024001 ...
Page 75: ...A 2 Appendix 2 Key PCB Circuit Diagram NAME CODE KEY PCB CIRCUIT DIAGRAM PT1090 LW4025 001 ...
