III - 38
CASSETTE submode (3 key*)
With the "CLOCK 1" displayed, LCD check "CST" appear as shown below by
pressing the
key or the 3 key.
Outline of CASSETTE submode
- Check the pressing of the five sensor switches (cassette sensor
2
,
3
,
7
and
6
) and the cutter sensor.
- Press the cassette sensor
2
,
3
,
7
,
6
and the cutter sensor in this order.
(Be careful in order of the cassette sensor
7
and
6
.)
- Press the sensor by itself. If press the sensor with others, the NG is judged.
- The position of the cassette sensor is as shown below. Using the switch of the
2
,
3
,
7
and
6
. Do not use other than them.
- If press the
key on this checking, the LCD check "CST" appear.
With LCD check "CST", change the checking of the cassette sensor/cutter sensor
switch by pressing the
key. The machine displays "CST 1".
Change the "CST 2" by pressing/releasing the cassette sensor
2
.
The machine displayed "CST 1 X" by pressing other than the cassette sensor
2
in the state of "CST 1".
Change the "CST 3" by pressing/releasing the cassette sensor
3
.
The machine displayed "CST 1 X" by pressing other than the cassette sensor
3
in the state of "CST 2".
1
2
3
4
7
5
6
Summary of Contents for PT1090 - P-Touch - Labelmaker
Page 1: ...SERVICE MANUAL MODEL PT 1090 ...
Page 7: ...I 3 Figure 1 1 2 Display and Key Arrangement USA version EUROPE version ...
Page 74: ...A 1 Appendix 1 Main PCB Circuit Diagram NAME CODE MAIN PCB CIRCUIT DIAGRAM PT1090 LW4024001 ...
Page 75: ...A 2 Appendix 2 Key PCB Circuit Diagram NAME CODE KEY PCB CIRCUIT DIAGRAM PT1090 LW4025 001 ...
