III - 23
[ 4 ] Installing the Ribbon Clutch Spring, the Ribbon Drive Gear and the Ribbon
Drive Cam
(1) Turn the bottom cover upside down.
(2) Set the ribbon clutch spring to the ribbon drive cam in the state of that the end "a"
of the ribbon clutch spring is the lower side.
(3) Insert the ribbon drive gear and the ribbon drive cam into the shaft of the bottom
cover, and set them with the one screw.
NOTE:
Catch the end "a" of the ribbon clutch spring into the groove of the ribbon
drive gear.
Figure 3.1-23 Installing the Ribbon Clutch Spring, the Ribbon Drive Gear and the Ribbon Drive Cam
Screw
Ribbon drive cam
Ribbon drive gear
Groove of the
ribbonn drive gear
Ribbon clutch
spring
End "a"
Bottom cover
Summary of Contents for PT1090 - P-Touch - Labelmaker
Page 1: ...SERVICE MANUAL MODEL PT 1090 ...
Page 7: ...I 3 Figure 1 1 2 Display and Key Arrangement USA version EUROPE version ...
Page 74: ...A 1 Appendix 1 Main PCB Circuit Diagram NAME CODE MAIN PCB CIRCUIT DIAGRAM PT1090 LW4024001 ...
Page 75: ...A 2 Appendix 2 Key PCB Circuit Diagram NAME CODE KEY PCB CIRCUIT DIAGRAM PT1090 LW4025 001 ...
