Brother PE-DESIGN 2.0 Instruction Manual Download Page 31

Page: 31 / 200

Contents

Bef

ore Using

Getting Star

ted

Design Center

La
y

out & Editing

File Utility

Programma

Stich Creator

Quic

k Ref

erence

Alphabetic Inde

Step 9

Saving the File

This image will be used as the basis of a more complex embroidery picture. For that reason, we need to
save it.

Click

File

on the menu bar, then click

Save

on the submenu.

This dialog displays.

NOTE:
To save the file under its default file name and in the same folder as the original bitmap file, you could
use

Save

instead of

Save As

If you did not save the line image data, you will be asked whether you want to save it as a

*.pel

file.

◆

A default name

Flower.pem

is dis-

played.

◆

If necessary, change the drive and
folder.

◆

Click

Save

to save the file.

Summary of Contents for PE-DESIGN 2.0









































































































































































































Search results

Summary of Contents for PE-DESIGN 2.0

Reviews:

Brands by name

Popular brands

Brother PE-DESIGN 2.0, Instruction Manual

Search results

Summary of Contents for PE-DESIGN 2.0

Reviews:

Brands by name

Popular brands