Brother PE-DESIGN 2.0 Instruction Manual Download

Page: 22 / 200

Contents

Bef

ore Using

Getting Star

ted

Design Center

La
y

out & Editing

File Utility

Programma

Stich Creator

Quic

k Ref

erence

Alphabetic Inde

Step 3

Converting to Line Image

Move to line image: Click

Stage

on the menu bar, then click

To Line Image

on the submenu. You can

also click the button of the Toolbar shown below:

NOTE:

Many menu functions can be activated by clicking a button on the Toolbar.

The

Cut out to Line Image

dialog will display. In this dialog, you will select the color(s) that will be

used to make the outline of the bitmap image.

When you click

, the line image displays.

◆

If necessary, scroll and zoom the image.

◆

Move the cursor over the image. Its shape

changes to

. Click on any point of the outline.

The selected color displays in the upper box

under

Pick Colors

and a

appears in the

check box to show that the color is selected.

•

When the outline of the bitmap image uses more
than one color, you can repeat to select a total of
five colors. If you try to select more, colors are
scrolled down, and the color that was at the bot-
tom is deselected.

•

If you selected a color by mistake, simply click its
check box to deselect it.

◆

Click

View

to see the effect of your selection.

•

If you wanted to select another choice of color,
click

Cancel

. The bitmap image displays again

and you can repeat this step with another
color.

◆

If your preview image looks like the one shown
here, click

to confirm the outline of your pat-

tern.

◆

Click

Cancel

to exit and go back to the bitmap

image.

•

At this stage, the data can be saved as a

*.pel

file.

Summary of Contents for PE-DESIGN 2.0









































































































































































































Search results

Summary of Contents for PE-DESIGN 2.0

Reviews:

Related manuals for PE-DESIGN 2.0

Brands by name

Popular brands

Brother PE-DESIGN 2.0, Instruction Manual

Search results

Summary of Contents for PE-DESIGN 2.0

Reviews:

Related manuals for PE-DESIGN 2.0

Brands by name

Popular brands