background image

95

Contents

Bef

ore Using

Getting Star

ted

Design Center

La
y

out & Editing

File Utility

Programma

bl

Stich Creator

Quic

k Ref

erence

Alphabetic Inde

x

Selection Mode

To apply settings to an existing pattern, you must first select it.The cursor selection mode is used to 
select one or more patterns. Once a pattern is selected, you can move it, scale it, and change its direc-
tion by rotating it or inverting it.

Selecting patterns

1

Click 

 on the Tool Box. The shape of the cursor changes to 

.

2

Click the pattern that you want to select.
You know that the object is selected when handles are displayed. 

The Status bar shows the dimensions (width and height) of the selection.

3

To deselect the pattern, select another one, click on the white space or click another tool button of 
the Tool Box.

4

To select an additional pattern, click that pattern while holding the 

 key down.

Note that you can also select patterns by dragging the cursor across the Design Page. As you 
drag, a dotted rectangle appears. When you release the mouse button, all patterns that overlap 
that rectangle will be selected.
If you select other patterns than you wanted to, click on the white space to deselect all, and start 
again.

Moving patterns

1

Move the cursor over a selected pattern or group of selected patterns.

The shape of the cursor will change to 

.

2

You can now drag the pattern to another location.

Scaling patterns

1

Move the cursor over one of the handles of a selected pattern or group of selected patterns.

The shape of the cursor will change to 

 or 

, depending on the handle the 

cursor is on.

2

Drag the handle in the direction of the arrow to scale the pattern.

 is for scaling the width.

 is for scaling the height.

 and 

 are for scaling both dimensions at the same time.

As you drag the handle, you can check the changing size on the Status bar.
Note that some patterns imported from cards cannot be scaled.
When you scale imported patterns, the number of stitches remain the same, resulting in a quality 
loss. To maintain the quality of the embroidery, you need to adjust the number of stitches after 
scaling the pattern. This can be done in the 

Stitch to Block Sensitivity

 dialog, which you open by 

selecting the 

Sew – Stitch to Block

 command. For more information on how to select this function, 

see “Stitch to Block” on page 149.

Handles

Shift

Summary of Contents for PE-DESIGN 2.0









































































































































































































Reviews: