III - 48
[10] Reassembling the Upper Cover and the Under Cover
(1) Insert the tape sensor PCB ASSY into the insert guide.
NOTE 1:
Insert the tape sensor PCB ASSY until it hits the groove of the insert
guide.
NOTE 2:
Confirm that you can see the tape sensor PCB ASSY from the hold of
the insert guide.
NOTE 3:
Fold the flat cable after assembling the tape sensor PCB ASSY.
Fig. 3.5-29 Reassembling the Upper Cover and the Under Cover (1)
Tape sensor PCB ASSY
Groove
Insert guide
Groove
Tape sensor PCB ASSY
Insert guide
Flat cable of
the tape sensor PCB ASSY
