Brother P-Touch QL-500, Operation Manual

Page: 13 / 118

13
STEP
1
STEP
2
STEP
3
For Wind
ows
For Ma
cintosh
STEP
4
Intr
oduction
Befo
re using
the
printer
Ma
intena
nce a
nd
Tr
ouble
shoot
ing
C
onnecting
to your PC
C
reating and
pr
int
ing a
lab
el (
F
or
Windows)
„ CD/DVD Film Labels
•
In prior to use, be sure to follow the instructions in your CD/DVD player's instruction
manual regarding applying CD/DVD labels.
•
Do not use CD/DVD labels in a slot loading CD/DVD player, for example a CD player in
a car where the CD is slid into a slot in the CD player.
•
Do not peel off the CD/DVD label once it is applied to the CD/DVD.
•
A thin surface layer may come off, resulting in damage to the disk.
•
Do not apply CD/DVD labels to CD/DVD disks designed for use with ink jet printers.
Labels peel off of these disks easily, and using disks with peeled labels can result in loss
or damage of data.
•
When applying CD/DVD labels, use the applicator included with the CD/DVD label rolls.
Doing so could cause damage to the CD/DVD player.
•
User's shall take full responsibility for applying CD/DVD labels. Brother accepts no
responsibility for any loss or damage of data caused by the inappropriate use of CD/DVD
labels.
„ CD-ROM and Software
•
Do not scratch the CD-ROM and place the CD-ROM onto the place with extremely high
or extremely low temperatures.
Also, do not put heavy objects on the CD-ROM or apply force to the CD-ROM.
•
The software contained on the CD-ROM is meant for use with the printer only. See
License on CD for further details. This software may be installed on multiple personal
computers for use at an office, etc.
„ Cutter
•
The average number of cuts is 5,000 or more depending on the operating environment.
Dull cut, the inability to cut straight, or frequent paper jams may indicate that the cutter
life is near the end. Replace the cutter if these conditions occur.
Note that Brother does not assume responsibility for any damage, etc. arising from failure
to follow the precautions listed.